RMS Connect – Remote Device Access

What RMS Connect does

RMS Connect provides a proxied remote access session to a Teltonika device’s web interface (Luci-based UI) and CLI (command line) from the RMS dashboard. It works through NAT and firewalls without port forwarding or a public IP on the device. Sessions are encrypted end-to-end via the RMS tunnel.

How RMS Connect works

The Teltonika device maintains a persistent outbound HTTPS connection to the RMS platform. When you initiate an RMS Connect session from the dashboard, RMS proxies your browser session through this existing tunnel to the device’s local web interface. You see the device’s own web UI as if you were connected locally – but you are accessing it via the cloud.

For CLI access, RMS Connect provides a browser-based SSH terminal that connects to the device’s shell via the same tunnel. No SSH client installation required on your side; no open SSH port required on the device side.

What you can do via RMS Connect

Access the full device web UI – all configuration pages, status pages, and diagnostics
Change network configuration, APN settings, firewall rules, routing
Run diagnostics – ping tests, traceroute, signal quality checks
View real-time logs
Restart the device or specific services
Access the full CLI via browser SSH terminal
Run scripts or custom commands

RMS Connect vs VPN for remote access

Method	Setup complexity	Public IP needed	Port forwarding	Security
RMS Connect	Zero – included in RMS	No	No	TLS via RMS tunnel
OpenVPN / WireGuard	Medium – requires VPN server	For VPN server	Depends on config	Strong – if well configured
Port forwarding SSH	Low – but risky	Yes	Yes	Poor if exposed publicly
RMS VPN	Low – configured in RMS	No	No	TLS via RMS